Power Button; Reset The Wah7608; The Wps Button - ZyXEL Communications WAH7608 User Manual

1.6 Power Button

Use the power button on the side panel to turn the WAH7608 on or off. To turn on, press the power
button until the OLED screen displays ZYXEL.
Note: The WAH7608 OLED screen turns on automatically when it is connected to an
appropriate power source.
Power Off
• To turn the WAH7608 off, press the power button once and release it when the OLED screen displays
Shut Down...

1.6.1 Reset the WAH7608

• Remove the lid. Press the reset button and release it when the OLED screen displays Reset.
This resets the WAH7608 to the factory default configuration. This means that you will lose all
configurations that you had previously, such as WiFi SSID and password.

1.7 The WPS Button

Your WAH7608 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure WiFi
network. WPS is an industry standard specification, defined by the WiFi Alliance.
WPS allows you to quickly set up a WiFi network with strong security, without having to configure security
settings manually. Each WPS connection works between two devices. Both devices must support WPS
(check each device's documentation to make sure). When WPS is activated on a device, it has two
minutes to find another device that also has WPS activated. Then, the two devices connect and set up
a secure network by themselves.
Your WAH7608 WPS button has two functions:
• Press the WPS button for more than 1 second: You can use the WPS button on the side panel of the
WAH7608 to activate WPS in order to quickly set up a WiFi network with strong security. Press the WPS
button for more than 1 second and release it. Press the WPS button on another WPS-enabled device
within range of the WAH7608.
Chapter 1 Get to Know Your WAH7608
WAH7608 User's Guide
12