Wifi/Wps Button - ZyXEL Communications Nebula LTE3301-PLUS User Manual

2.3.1 WiFi/WPS Button

Use the WiFi/WPS button on the Zyxel Device to turn on or turn off the WiFi network or quickly build a WiFi
connection with a WiFi client.
2.3.1.1 Nebula LTE3301-PLUS
Follow the steps below to activate WiFi or WPS for Nebula LTE3301-PLUS.
Activating WiFi
Make sure the power is on.
1
Press the WPS button for more than 5 seconds then release it.
2
The WLAN LED turns green/white.
3
Activating WPS
You can quickly set up a secure wireless connection between the Zyxel Device and a WPS-compatible
client by adding one device at a time.
Ensure WiFi is turned on.
1
Press the WiFi/WPS button for more than 1 second but less than 5 seconds and release it. Please note
2
that pressing more than 5 seconds will turn off WiFi.
Press the WPS button on another WPS-enabled device that is within range of the Zyxel Device.
3
After a WiFi connection is established, the WLAN LED turns green/white.
4
Figure 14 Nebula LTE3301-PLUS WiFI/WPS Button
2.3.1.2 Nebula NR5101
Follow the steps below to activate WiFi or WPS for Nebula NR5101.
Activating WPS
You can quickly set up a secure wireless connection between the Zyxel Device and a WPS-compatible
client by adding one device at a time.
Ensure WiFi is turned on.
1
Chapter 2 Hardware Panels
Nebula Mobile Router User's Guide
30