Common Windows Problems - Samsung SCX-6545N Series User Manual

To receive a printed or screen-displayed message when PostScript
errors occur, open the Print Options window and click the desired
selection next to the PostScript errors section.
POSSIBLE
PROBLEM
CAUSE
The PostScript
PostScript file
driver may not be
cannot be
installed correctly.
printed.
The print job was
"Limit Check
too complex.
Error" message
appears.
The print job may
A PostScript
not be PostScript.
error page prints.
The printer driver
The optional tray
has not been
is not selected in
configured to
the driver.
recognize the
optional tray.
It might take
The machine
longer to print
does not staple
when you print a
correctly when
PDF file as an
printing more
image.
than one copy
from Acrobat
Reader with a
collate option.
(only in Window/
Macintosh)
Turning off
The machine
collation options
does not staple
on applications
correctly when
(including CUPS
printing more
pstops collation
than one copy
option) may solve
with a collate
this problem.
option. (only in
Linux)
SOLUTION
• Install the PostScript
driver, referring to
Software section.
• Print a configuration page
and verify that the PS
version is available for
printing.
• If the problem persists,
contact a service
representative.
You might need to reduce the
complexity of the page or
install more memory.
Make sure that the print job is
a PostScript job. Check to
see whether the software
application expected a setup
or PostScript header file to be
sent to the machine.
Open the PostScript driver
properties, select the Device
Settings tab, and set the Tray
option of the Installable
Options section to Installed.
Try to print with the latest
Adobe Reader program or
print with turning on "Print as
Image" option from Acrobat
printing options. It might take
longer to print when you print
a PDF file as an image.
If you want to use the
collation option, go to printer
driver's advanced option and
turn the collation on.

Common Windows problems

CONDITION
Exit all software applications. Remove all
"File in Use"
software from the StartUp Group, then restart
message appears
Windows. Reinstall the printer driver.
during installation.
Close all other applications, reboot Windows
"General Protection
and try printing again.
Fault", "Exception
OE", "Spool32", or
"Illegal Operation"
messages appear.
These messages may appear during printing.
"Fail To Print", "A
Just keep waiting until the machine finishes
printer timeout error
printing. If the message appears in standby
occurred." messages
mode or after printing has been completed,
appear.
check the connection and/or whether an error
has occurred.
Refer to Microsoft Windows User's Guide that came with your
computer for further information on Windows error messages.
SUGGESTED SOLUTIONS
Troubleshooting_ 118