Samsung SCX-6545N Series User Manual page 90

OPTION OPTION
Authentication Network
Method Authentication
(Continue)
Foreign Device
Interface
89 _Machine status and advanced setup
DESCRIPTION
It enables the network
authentication mode. When the
users already belong to a server-
based networks, the Network
Authentication system can be
simply configured with the existing
server. Then the user can access
with the ID and password stored in
the remote authentication server.
To use any features in Network
Authentication mode, the users
have to get a certificate from SMB,
FTP, LDAP, or Keberos server
defined in SyncThru™ Web
Service.
When you install the optional FDI
kit, select Foreign Device
Interface Configuration Setup to
activate it.
• Job Timer: If there is not
enough credit, you can set the
machine to cancel a job right
away or wait a designated
amount of time for a deposit.
• Print Job Control: When it is
enabled, the both computer
printing and copying are
possible since the credit
remains. With Disable, only
the copy printing job needs the
credit. (which means a
computer printing a report or a
fax job needs no credits)
• Inhibit Services: When no
credit is left, the machine
disables the copy job only with
Copy Only. With All Services,
scanning service and copy job
are disabled.
• Internal Credits: It is used
when you cancel the job or
when the job is cancelled by
the device due to insufficient
credits (coin) or is canceled by
user's request. If you select
Enable, the machine deposits
a credit equal to the number of
sheets that did not print out
correctly, then it prints next job
for free (for the amount
deposited). With Disable, even
if you cancel the printing job,
the machine includes jammed
paper in the count and the cost
of printing.
• Image Counter: Depends on
whether the machine counts
blank white pages.
OPTION OPTION
Accounting No Accounting
Method
Network
Accounting
Standard
Accounting
DESCRIPTION
It disables accounting features.
You can set the network account
for users by using SyncThru™
Web Admin Service's job
accounting plug-in. When the
users performs their copy, fax,
print, or scan service job with the
machine, the account module
records it. You can see the report
from the SyncThru™ Web Admin
Service.
You can set the local account for
maximum 500 users. When the
users perform their copy, fax,
print, or scan service job with the
machine, the account module
records it. You can see the report
from Standard Acct. Usage
Report in Machine Setup >
Admin Setting > Print/Report tab
> Accounting Reports.
As the device itself can manage
user's ID and usage without any
remote server, this feature is
highly suitable for small and
medium businesses.
The accounting system
regards storing a file to a
single server as a single
count.
• Accounting ID List: It shows
the accounting ID list. You can
add, edit, or delete the ID.
• Login Setting: You can
configure for user to login
either with ID and password
(ID & password Login) or with
ID only (ID only Login).
• Accounting ID List: It shows
the accounting ID list. You can
add, edit, or delete the ID.
• Login Setting: You can
configure for user to login
either with ID and password
(ID & password Login) or with
ID only (ID only Login).