Replacing The 3.5-Inch Hard Drive; Procedure; Post-Requisites - Dell D27M Service Manual

Replacing the 3.5-inch hard drive

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Place the hard drive in the hard-drive bracket.
2 Align the screw holes on the hard drive with the screw holes on the hard-drive
bracket.
3 Replace the four screws (6-32UNCx3.6) that secure the hard-drive bracket to
the hard drive.
4 Slide the hard-drive assembly into the slot on the side-chassis and replace the
two screws (6-32UNCx3.6) that secure the hard-drive assembly to the side-
chassis.
5 Connect the data cables and the power cables to the hard drive.
6 Place the computer in an upright position.

Post-requisites

Replace the right-side
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
61