Table of Contents
Advertisement
Chapter 3: Getting Started & Adjusting the Display
When the counter reaches zero a beep sounds, and the display unit switches
off. Release the POWER key.
Note: Switch the display unit off before you remove the power cord.
Simulator Mode
When simulator mode is on a simulator database box is displayed.
When the display is switched off then on again, simulator mode is maintained.
It is recommended that you select the System Set Up Menu and switch off
simulator mode when you have finished.
➤
To view simulated image:
1. Press MENU followed by either:
MENU
the SYSTEM SET UP soft key for simulated data or
the SONAR SET UP soft key for a simulated fishfinder image.
SYSTEM
SET UP¬
The set up menu pop-up is displayed.
2. Use the trackpad to move the selection bar over the option SIMULATOR/
SONAR
SET UP¬
SONAR SIMULATOR. The simulator soft keys are displayed.
3. In the system set up menu, press DATA to view the chart display with simu-
lated position.
In the sonar set up menu, press the ON soft key to switch on the sonar simu-
lator.
4. Press ENTER twice to return to the default display.
Note: Any waypoints placed on the chartplotter in simulator mode are re-
tained in the database list and are available for use in routes.
Changing the Lighting & Contrast (L755)
You can change the level of backlighting and contrast for the screen and keys.
The key lighting is set the same as the screen lighting, except that it remains
switched on at its lowest level even when the screen lighting is turned off, so
that you can always find the keys.
➤
To change the lighting and contrast:
1. Press the MULTI key to display the soft key controls:
The last-used soft key is highlighted in inverse video (white text on a black
background).
POWER
AUTO LO HI
70%
37%
LIGHT
CONTRAST
WHT LINE
OFF ON
D4895-2
3-5
Hide quick links:
Advertisement
Table of Contents
