Using The Route List To Erase And Name A Route; Editing A Route - Raytheon HSB L760 Owner's Handbook Manual

Chapter 5: Standard Chart Operations
4. Press ENTER to remove the Route Information window, then ENTER or
CLEAR to return to the route soft keys.
5. To return to the default soft key display, press ENTER.

Using the Route List to Erase and Name a Route

You can delete a route and you can re-name a route by selecting the route on
the route list.
➤
To select a route to delete or re-name:
1. Press the ROUTE soft key, followed by MORE, then press ROUTE LIST. The
ROUTE
route list is displayed. The selection bar indicates the selected route.
Press the appropriate soft key – ERASE ROUTE or NAME ROUTE.
2. If you ERASE a route you are prompted to confirm.
Press NO to cancel the operation, then ENTER or CLEAR if you wish to
ERASE
ROUTE
remove the route list.
Press YES to erase the route from the list, then ENTER or CLEAR to remove
the route list.
3. If you NAME a route, use the trackpad to move the cursor right or left to the
NAME
character you wish to edit. Then use the top or bottom of the trackpad to
ROUTE
increase or decrease the letter or number.
4. Press ENTER to clear the Name List, or CLEAR to cancel the name then to
return to the default soft key display, press ENTER again.

Editing a Route

Once you have created a route, you can edit it by:
• Inserting a Waypoint into the route
• Adding waypoints at the end of the route
• Removing a Waypoint
• Reversing a Route
• Moving a Waypoint as described in Moving a Waypoint on page 5-13.
Any changes you make to the route affect only the current route. The current
route is always held in position 0 in the database, so you need to Save the route
if you want to keep the changes.
5-21