Simulator; Fishfinder Set Up Parameters - Raytheon HSB L760 Owner's Handbook Manual

7-10

Simulator

The simulator allows you to operate your display without data from the
transducer and/or external data sources. The system set up simulator options
have the following functions:
• Data provides simulated numerical data, and a waypoint display.
• Radar (integrated systems with a radar display) provides simulated radar
picture, with example targets. The picture does not change if you change
the range, although the range rings are adjusted (see HSB Series Path-
finder Radar documentation)
• Both provides simulated data and radar picture.
When the simulator is switched on, a SIMULATOR data box is displayed during
operation, showing the simulation selected.
Fishfinder simulator mode is set in the Sonar setup menu, described in
Section 7.4.

7.4 Fishfinder Set Up Parameters

The SONAR SET UP option allows you to set up the fishfinder according to your
system configuration and your personal preferences.
The following table lists the Sonar Set Up parameters and their options, shows
the factory default setting, and provides a space for you to make a note of your
new default setting. Each parameter is described in the following subsections.
Table 7-2:
Parameter
TARGET DEPTH ID
COLOR BAR
DEPTH DIGIT SIZE
SONAR HSB MODE
DEPTH OFFSET
SPEED CALIBRATE
TEMP CALIBRATE
SONAR SIMULATOR
.
Fishfinder Set Up Parameters
Options*
OFF
ON
OFF
ON
LARGE
SMALL
REPEATER
MASTER
Value
0% to 200%
-9.0 °F to +9.0 °F
OFF
ON
HSB Series L755 and L760 Fishfinder
Factory New Default
Default
OFF
ON
LARGE
MASTER
0.0
100%
0°F
OFF