Placing A Waypoint - Raytheon HSB L760 Owner's Handbook Manual

Chapter 5: Standard Chart Operations

Placing a Waypoint

The scenario Place and Goto a Waypoint on page 3-32 provides a simple
example of how to place a waypoint.
➤
To access the place waypoint soft keys, press MARKS:
PLACE WPT
MARKS
AT CURSOR
➤
To place a waypoint at the cursor position or at the vessel position:
PLACE WPT
1. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL soft
AT CURSOR
key. The waypoint is added to the waypoint list and tagged using the next
available number.
PLACE WPT
AT VESSEL
The waypoint soft keys are displayed until you move the cursor away from
the waypoint or press CLEAR.
WAYPOINT
You can use the EDIT WAYPOINT soft key to name the waypoint as
described in Editing Waypoints below.
2. Press CLEAR or ENTER to remove the place waypoint soft keys.
➤
To place a waypoint using the Waypoint List:
1. Press MARKS, followed by the WAYPOINT LIST soft key. The Waypoint List
MARKS
and associated soft keys are displayed.
WAYPOINT
u
LIST
POSITION
BRG _186°
TEMP
DATE
GOTO
WAYPOINT
PLACE WPT
AT VESSEL
GOTO EDIT
WAYPOINT
WAYPOINT LIST
SYMBOL NAME
WAYPOINT 001
WAYPOINT 002
WAYPOINT 003
WAYPOINT 004
WAYPOINT 005
50°21^966N
001°20^368W
RNG _21.0nm
DEPTH
---° ---
C
TIME
--/--/-- --:--:--
EDIT MAKE NEW
WAYPOINT WAYPOINT
WAYPOINT
LIST
D4169-1
ERASE MOVE
WAYPOINT WAYPOINT
D4163-1
m
WAYPOINT
TRANSFER
D4262-2
5-9