Displaying Route Information - Raytheon HSB L760 Owner's Handbook Manual

Chapter 5: Standard Chart Operations

Displaying Route Information

You can display the following information that relates to your route:
• Route leg or waypoint information, using the context-sensitive cursor.
• Details of waypoints in the route, using the soft keys. You can use this
information to review your passage plan.
Route Leg and Waypoint Information
➤
To display information about a route leg, move the cursor over the leg until the
letters RTE are displayed. A Route Leg data box such as the following is
RTE displayed.
ROUTE NO.
ROUTE NAME
LEG 02 - 03
0°T
To remove the data box, move the cursor away from the route or press CLEAR.
➤
To display information about a route waypoint, move the cursor over the
waypoint until the letters WPT are displayed. The waypoint data box is
WPT displayed, this box includes the route and waypoint number.
To remove the data box, move the cursor away from the route or press CLEAR.
Using Route Information to Review Your Passage Plan
You can view data for all the waypoints in the current route, or any saved route.
You select the route from the database list and the information is displayed in a
Route Information pop-up; the following details are provided for each
waypoint:
Position
Bearing (from previous waypoint)
Length of leg (from previous waypoint)
Total Length
Time (ETA or Elapsed)
Soft keys are provided to toggle the time between ETA or elapsed and to
change the Speed Over Ground (SOG) value; the ETA for each waypoint is
calculated using the selected SOG, so you can change the SOG to determine its
effect on your ETA.
The chart scenario Review Your Passage Plan on page 3-36 provides a simple
example of how to use the route information.
5.5nm
D4259-2
5-19