Raystar 112Lp (Seatalk Version - Raytheon HSB L760 Owner's Handbook Manual

B-4

Raystar 112LP (SeaTalk version)

To connect your Raystar 112LP to your Chartplotter or Combined Radar/
Chartplotter, refer to the first illustration below or follow the instructions in
Chapter 2.
To connect the Raystar 112LP and your Differential Beacon Receiver, cut off
the 5-pin connector and strip back the red, black and green wires. Remove the
sleeve from the end of the Raystar 112LP cable to expose the green and brown
wires, then connect to the Auxiliary Junction Box as shown in the second
illustration below.
CAUTION:
Ensure the correct polarity of the 12 V supply before applying display or
SeaTalk power. It is recommended that a multimeter is used to check the
connections.
To Display Unit
SeaTalk Socket
Black
12V
Power
Supply
Red
(fused)
To Display Unit
SeaTalk Socket
Black
12V
Power
Supply
Red
(fused)
HSB Series L755 and L760 Fishfinder
Screen
Red
Yellow
Screen
Red
Yellow
Green
Brown
Black
White
Red
Green
Yellow
From
GPS
sensor
D4292-3
From
GPS
sensor
From
the
DBR
D4296-3