Table of Contents
Advertisement
EN
12. Declaration of Conformity
BEKO TECHNOLOGIES GMBH
Im Taubental 7
41468 Neuss
GERMANY
Phone: +49 2131 988-0
www.beko-technologies.com
We hereby declare that the products named below comply with the stipulations of the relevant directives and
technical standards. This declaration only refers to products in the condition in which they have been placed into
circulation. Parts which have not been installed by the manufacturer and/or modifications which have been
implemented subsequently remain unconsidered.
Product designation:
Type:
Supply voltage versions:
Maximum operating pressure:
Product description and function:
Low Voltage Directive 2014/35/EU
Applied harmonised standards:
EMC Directive 2014/30/EU
Applied harmonised standards:
RoHS II Directive 2011/65/EU
The products meet the requirements laid down in European Directive 2011/65/EU concerning the restriction of the
use of certain hazardous substances in electrical and electronic devices.
The manufacturer shall have sole responsibility for issuing this declaration of conformity.
Neuss, 11/06/2018
EU_decl_DP-M _EPC_en_06_2018.docx
DRYPOINT
M eco control
®
EU Declaration of Conformity
DRYPOINT
DEC1-30S
DEC2-40S
DEC3-60S; DEC3-80S
DEC4-80S; DEC4-115S
DEC5-115S
DEC6-135S
DEC7-165S
DEC8-250S
DEC9-330S
95...240 VAC ±10% (50-60 Hz) / 100...125 VDC ±10%
10 bar (g)
Compressed air drying system with membrane dryer with
integrated filter/condensate drain and sensor controlled
pressure dew point control for the setting of stable degrees of
dryness.
EN 61010-1:2010
EN 61326-1:2013
EN 55011:2009 + A1:2010 group 1, class B
Signed for and on behalf of:
BEKO TECHNOLOGIES GMBH
i.V. Christian Riedel
Head of International Quality Management
Installation and operation manual
M eco control
®
49
Advertisement
Table of Contents
