Replacing The Float Drain-Off Conduit - Beko DRYPOINT M eco control Installation And Operational Manual

Installation and operation manual EN

7.1.4. Replacing the float drain-off conduit

If the float drain-off conduit is defective, then it must be replaced.
1. Close the shut-off valves (1) and open the shut-off valve (2) of the bypass.
2. Hold the top part of the housing, unscrew the housing extension (3) and remove it (4).
2
1
1
3
4
For additional information regarding exchanging the float drain-off conduit, refer to the instruction sheet shipped with the
spare part.
34 DRYPOINT M eco control
®