Tool Holder In The Drill Spindle; Working With The Power Tool; On/Off Switch [1-6]; Led Lamp With Capacity Indicator - Festool TXS Instruction Manual

Tool holder in the drill spindle

Bits can be inserted directly in the hexagon socket
holder on the drill spindle [9-1] to shorten and re-
duce the weight of the machine.
Consider the pictures on the fold-out page.
WARNING
Risk of injury

Always secure the workpiece in such a manner
that it cannot move while being machined.

On/Off switch [1-6]

Press = ON, release = OFF
 The speed of the machine depends on how far
the on/off switch is pressed in.

LED lamp with capacity indicator

The LED bulb [1-10] lights up when the ON/OFF
switch is pressed [1-6].
After releasing the ON/OFF switch [1-6] the capac-
ity indicator on the LED lamp [1-10] displays the
state of charge of the battery pack for a few sec-
onds:

Working with the power tool

100%
0%
Magnetic, for storing bits and bit holders.
Power tool shuts down, capacity indicator flashes:
Battery pack is empty.

Power tool shuts down, capacity indicator does
not flash: Power tool is overheating or has been
overloaded.


9
9-1

Bit store [1-11]

Warning signals

Change the battery pack.
Apply a lesser load to power tool.
Allow power tool to cool down.
70 - 100%
40 - 70%
15 - 40%
< 15%
Recommendation:
Charge battery pack
before further use.
15