Eccentric Attachment Dd-Es [6]; Tool Holder In The Drill Spindle [7]; Working With The Power Tool; On/Off Switch [1-3] - Festool T 18+3 Li Instruction Manual

Eccentric attachment DD-ES [6]

Screwdriving near edges with bits according to ISO
1173 (partly as accessory).
DD-ES
Consider the pictures on the fold-out page.
WARNING
Risk of injury

Always secure the workpiece in such a manner
that it cannot move while being machined.

On/Off switch [1-3]

Press = ON, release = OFF
 The speed of the machine depends on how far
the on/off switch is pressed in.
The LED bulb [1-5] lights up when the ON/OFF
switch is pressed [1-3].

Bit store [1-2]

Magnetic, for storing bits and bit holders.
1
2
3

Working with the power tool

Tool holder in the drill spindle [7]

Bits can be inserted directly into the hexagon sock-
et holder of the drill spindle.
6

Acoustic warning signals

Acoustic warning signal sounds and the machine
switches off to indicate the following operating
states:
Battery low or machine over-
loaded.
– Change the battery.
– Reduce machine workload.
Machine is overheating.
– You must allow the machine to
cool down before further usage.
Battery pack faulty or overheated.
– Once the battery pack has cooled
down, perform a function check
using the charger.
7
13