Chuck Bf-Fx 10; Right Angle Chuck Xs-As - Festool TXS Instruction Manual


Pull the release ring [6-3] forwards.

Attach the tool chuck to the drill spindle [6-4].

Release the ring [6-3].
Detaching the CENTROTEC

Pull the release ring [6-3] forwards.

Remove the tool chuck.
Changing tools

Pull back the green release ring [6-2] to attach
or detach tools with a CENTROTEC shank.

When attaching the tool, rotate until the hexa-
gon shank [6-1] engages in the hexagon holder
on the drill spindle.

Release the ring [6-2].

Chuck BF-FX 10

The chuck BF-FX 10 is used for clamping drill and
screwdriver bits up to 10 mm chuck diameter.
7
7-3
7-2
7-1
Attaching the chuck BF-FX 10

Attach the chuck to the drill spindle [7-4].

Pull the release ring [7-3] forwards.

Turn until the hexagon pin [7-5] on the chuck
engages in the hexagon socket holder in the
drill spindle.

Push the chuck all the way onto the drill spindle.

Release the ring [7-3].
Detaching the chuck BF-FX 10

Pull the release ring [7-3] forwards.

Remove the chuck.
Changing tools

Turn the clamping sleeve [7-2] anticlockwise to
14
7-4
7-5
open the clamping jaws [7-1].
 The arrow on the spindle indicates the opening
direction.

Insert the tool into the chuck.
CAUTION
Risk of injury

Clamp the tool centrally in the chuck!

Turn the clamping sleeve [7-2] clockwise to
clamp the tool.

Right angle chuck XS-AS

The right angle chuck XS-AS (partly accessories)
allows you to work (drill, fasten) vertically in rela-
tion to the longitudinal axis on the machine.
8
8-1
BF-FX 8
BF-FX 10
WH-CE
Fitting the right angle chuck XS-AS

Pull the green release ring [8-1] forwards.

Fit the right angle chuck to the drill spindle [8-
2].

Turn the chuck until is engages in the required
position.
 You can engage the right angle chuck in 16 dif-
ferent positions.

Release the ring [8-1].
Removing the right angle chuck XS-AS

Pull the green release ring [8-1] forwards.

Remove the right angle chuck.
Changing tools
The tools can be fixed on the right angle chuck via
CENTROTEC tool chuck, the chuck BP-XS 8 or BP-
XS 10 or directly into the drill spindle.
8-2