Configuration Examples For Network Qos; Feature History For Network Qos - Cisco Nexus 7000 Series Configuration Manual

Configuration Examples for Network QoS

Configuration Examples for Network QoS
The following example shows how to configure a network QoS policy:
policy-map type network-qos default-nq-6e-policy
class type network-qos c-nq-6e-drop
match cos 0-2,5-7
congestion-control tail-drop
mtu 1500
class type network-qos c-nq-6e-ndrop-fcoe
match cos 3
match protocol fcoe
pause
mtu 2112
class type network-qos c-nq-6e-ndrop
match cos 4
pause
mtu 1500

Feature History for Network QoS

The table below summarizes the new and changed features for this document and shows the releases in which
each feature is supported. Your software release might not support all the features in this document. For the
latest caveats and feature information, see the Bug Search Tool at
release notes for your software release.
Table 40: Feature History for Network QoS
Feature Name
Support for 4q8q policy
templates
Support for four ingress
buffers
network-qos policy
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
146
Release
6.2(2)
6.1(3)
5.1(1)
Configuring Network QoS
https://tools.cisco.com/bugsearch/
Feature Information
Support for four 4q8q templates that provide
eight egress queues for the Cisco Nexus 7710
switch and Cisco Nexus 7718 switch only.
Support for the default-8e-4q4q-policy
template that supports four ingress buffers.
This feature was introduced.
and the