Cisco Nexus 7000 Series Configuration Manual page 33

Using Modular QoS CLI
Table maps that are defined by the system are listed in the table below. The default mapping of values in the
tables maps is contained in RFC 2597. These table maps are not configurable.
Table 7: System-Defined Table Maps
Table Map Name
cir-markdown-map
pir-markdown-map
cos-discard-class-map
cos-dscp-map
cos-precedence-map
dscp-cos-map
dscp-precedence-map
dscp-discard-class-map
precedence-dscp-map
precedence-cos-map
precedence-discard-class-map
discard-class-cos-map
discard-class-prec-map
discard-class-dscp-map
Description
Table map used to mark down packets that exceed
the committed information rate (CIR).
Note
Table map used to mark down packets that violate the
peak information rate (PIR).
Note
Table map used to map the CoS value to the
discard-class value.
Table map used to map the CoS value to the DSCP
value.
Table map used to map the CoS value to the
precedence value.
Table map used to map the DSCP value to the CoS
value.
Table map used to map the DSCP value to the
precedence value.
Table map used to map the DSCP value to the
discard-class value.
Table map used to map the precedence value to the
DSCP value.
Table map used to map the precedence value to the
CoS value.
Table map used to map the precedence value to the
discard-class value.
Table map used to map the discard-class value to the
CoS value.
Table map used to map the discard-class value to the
precedence value.
Table map used to map the discard-class value to the
DSCP value.
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
System-Defined MQC Objects
Enter the show table-map command to
display the default mapping.
Enter the show table-map command to
display the default mapping.
17