New And Changed Information - Cisco Nexus 7000 Series Configuration Manual

New and Changed Information

•
New and Changed Information
The table below summarizes the new and changed features for this document and shows the releases in which
each feature is supported. Your software release might not support all the features in this document. For the
latest caveats and feature information, see the Bug Search Tool at
release notes for your software release.
Table 1: New and Changed QoS Features
Feature
Support for M3 modules
Shared buffer queuing on the F3
Series modules
Fabric QoS Mapping
4q8q policy templates that support
8 egress queues
Local Policy-Based Routing (PBR)
default-nq-8e-4q4q- policy
template for F2 modules
New and Changed Information, on page 1
C H A P T E R
Description
Support for M3 series modules.
Support for shared memory buffer
queues on the F3 Series modules
only.
The Fabric QoS Mapping feature
allows copying the default
configuration and modifying the
copied system queues that perform
flow control on fabric traffic within
the Cisco NX-OS device.
Four 4q8q policy templates that
support eight egress queues on the
Cisco Nexus 7710 switch and Cisco
Nexus 7718 switch only.
You can now configure local
policy-based routing.
The default-nq-8e-4q4q-policy
template supports four ingress
buffers.
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
1
https://tools.cisco.com/bugsearch/
Changed in Release
7.3(0)DX(1)
6.2(10)
6.2(2)
6.2(2)
6.2(2)
6.1.3
and the
1