Connecting To Http://Www.mywifiext.net - NETGEAR WN1000RP User Manual

My router security is WEP, and I entered the wrong passphrase or security key on the
booster. I cannot access the booster any more. What can I do?
The booster cannot check to see if the WEP passphrase is correct. If you entered the wrong
passphrase, your wireless device is not able to get the IP address from the booster. You must
reset the booster to the factory defaults to get the IP address back.
I have completed the Installation Wizard, but my wireless devices cannot get the IP
address from the booster. What can I do?
Make sure that the passphrase you entered on your wireless device is correct, and power
cycle the booster and your router. If your device is still not able to get the IP address:
1. Move the booster closer to your router, and move your wireless device closer to the
booster.
2. Disable the wireless interface and enable it again to see if your wireless device can get the
IP address.
3. If your router has a MAC filter (wireless access control), disable it, and follow the instructions
in the FAQs to add the device's MAC address to your router.

Connecting to http://www.mywifiext.net

If you have trouble connecting, try to locate the source of the problem:
• For help with passwords, see
• If your browser displays an error page, make sure that you include http:// when you type
this URL in the address field of your Internet browser. If you leave it out, you might not be
able to connect.
• The booster LEDs can help you tell if the booster is correctly set up and working as it
should.
- The best performance is delivered when Link Rate LED
LED are green.
- A workable performance is delivered when the Link Rate LED
PC to Booster LED
WiFi Booster for Mobile WN1000RP
Log In to the Booster
is green.
Troubleshooting
29
on page 11.
and the PC to Booster
is amber and the