Upgrade The Firmware; Advanced Settings; Advanced Wireless Settings - NETGEAR WN1000RP User Manual

Upgrade the Firmware

Unless you changed the settings in the Firmware Update screen previously, the booster is set
up to check for new firmware automatically at log in.
To check for firmware and upgrade if it is available:

1. Select Maintenance > Firmware Update. The following screen displays:
2. Click Check to see if new firmware is available. If it is, follow the onscreen prompts to
download it onto your computer.
3. In the Browse field, enter the path for the new firmware, or click Browse to locate and select
the file.
4. Click Upload to install the new firmware on your booster.
CAUTION:
Once you start the firmware upgrade, do not try to go online, turn off the
booster, shut down the computer, or do anything else to the booster until it
finishes restarting!

Advanced Settings

You can view or change advanced wireless settings.

Advanced Wireless Settings

The booster is already configured with the optimum settings. Do not alter these settings
unless you have a specific reason to do so. Incorrect settings might disable the booster
unexpectedly.
WiFi Booster for Mobile WN1000RP
Network Settings
24