Setup Menu; Connect The Booster To An Existing Wireless Network - NETGEAR WN1000RP User Manual

Note: You cannot use the Push 'N' Connect WPS button on the booster to
connect the booster to your wireless network. The WPS button on
the booster can be used only to connect a computer to the booster.
To join the booster network using WPS:

1. Select Add WPS Client. The following screen displays:
2. Select a radio button:
• Push Button (recommended). Either click the
button on the front of the booster.
• PIN Number. Select the radio button, and a PIN displays.
The booster tries to find the wireless client (the computer) that is attempting to join the
network. If you are using a WPS button, it tries for 2 minutes. If you are using a PIN, it
tries for 4 minutes.
3. Go to your wireless computer. Use its WPS software to try to connect to the booster.

Setup Menu

After initial setup, you can use the Setup Menu to view or change the settings.

Connect the Booster to an Existing Wireless Network

You can wirelessly connect the booster to your home network.
WiFi Booster for Mobile WN1000RP
Network Settings
14
button or press the WPS