Hardware Features - NETGEAR WN1000RP User Manual

The booster LEDs can help you tell if the booster is correctly set up and working as it should.
• The best performance is delivered when the Link Rate LED
LED are green.
• A workable performance is delivered when the Link Rate LED is amber and the PC to
Booster LED

Hardware Features

The following figure shows the booster.
On/Off button
WPS button
Figure 2. Booster
The LEDs on the front show how the booster is working:
• Link Rate. This LED indicates a wireless connection between the booster and the
router.
Green is best.
Amber is good.
Red is poor.
• Status. This LED is lit when the booster is powered on.
• PC to Booster. The LED is lit when the booster is connected to a computer.
The side panel has the following features:
• On/Off button. Turns the device on and off.
• WPS button. Press the WPS button to wirelessly connect the booster to your router
or wireless adapter.
WiFi Booster for Mobile WN1000RP
is green.
Link Rate
Status
PC to Booster
Factory Reset button
Getting Started
6
and the PC to Booster