Booster Ip Address Setup - NETGEAR WN1000RP User Manual

Booster IP Address Setup

The IP Address Setup screen shows whether the booster is set to get its IP address
dynamically from the router (this is the most common setting), or is set up with a static IP
address.
To view or change the IP address settings:

Select Setup > IP Address Settings.
The following information is displayed:
• Get Dynamically IP Address From Router. The wireless network router assigns an
IP address when the booster connects to its wireless network. Most networks are set
up so that the router does this automatically.
• Use Static IP Address. Specify a static IP address. This is not usually necessary. If
you set this up, you should be technically experienced or have a technically
experienced person help you.
- IP Address. The static IP address.
- IP Subnet Mask. The subnet mask associated with the IP address.
- Gateway IP Address. The IP address for the gateway.
- Primary DNS. The primary Domain Name Server (DNS).
- Secondary DNS. The secondary Domain Name Server (DNS).
WiFi Booster for Mobile WN1000RP
Network Settings
19