Performance - NETGEAR WN1000RP User Manual

2 As you move the booster, check the LEDs until you find a location where the Link Rate LED
is green or amber, and the PC to Booster LED
3 You might have to unplug the booster as you move it to a different location. If you do, from
the new location, power up the booster and continue to check the LEDs.
Once the LEDs show that the booster is in a good location, open a browser and go to
http://www.mywifiext.net to continue the setup process.

Performance

The Link Rate LEDs indicate the performance of the
to a router.
• The best performance is delivered when the Link Rate LED is green.
• A workable performance is delivered when the Link Rate LED is amber.
• A red Link Rate LED indicates a poor connection or no connection between the booster
and the router.
• Make sure that your
LED for performance.
To improve booster performance:

1 Move the booster closer to the router or to a different location with a better line of sight.
2 As you move the booster, check the Link Rate and the PC to Booster LEDs on the booster
until you find a good location. These LEDs should remain solid green.
WiFi Booster for Mobile WN1000RP
2.4 GHz wireless connection from the booster
PC to Booster LED is green before you check the Link Rate
Getting Started
9
is green.