Ip Address Setup - NETGEAR EX6100 User Manual

Note: Not all wireless computers support passphrase key generation. If
your computer does not support the passphrase, then you will need
to type the encryption key in order to join the wireless network.
• Key 1–Key 4. These values are not case-sensitive. You can manually enter the four
data encryption keys. These values have to be identical on all computers and access
points in your network. Enter 10 hexadecimal digits (any combination of 0
A F).
–
5. Select which of the four keys will be the default.
Data transmissions are always encrypted using the default key. The other keys can be
used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA
authentication is selected.
6. Click Apply to save your settings.

IP Address Setup

From the Extender menu at http://www.mywifiext.net, under the Maintenance heading, select
Setup > IP Address Settings.
The IP Address Setup screen shows whether the Extender is set to get its IP address
dynamically from the router (this is the most common setting), or is set up with a static IP
address.
• Get Dynamically IP Address From Router. The wireless network router assigns an IP
address when the Extender connects to its wireless network. Most networks are set up so
that the router automatically does this.
• Use Static IP Address. Specify a static IP address. This is not usually necessary. If you
set this up, you should be technically experienced or have a technically experienced
person help you.
- IP Address. The static IP address.
- IP Subnet Mask. The subnet mask associated with the IP address.
- Gateway IP Address. The IP address for the gateway.
EX6100 Universal Dual Band 11ac WiFi Range Extender
Extender Network Settings
16
9, a f, or
– –