Table of Contents
Advertisement
ET635 User Manual
Context area: Configured identities.
Outgoing identity
The current outgoing identity is indicated by a green ring around a green circle on a
white bar with a thin blue line on the left side. When you call someone, this is your
identity for the call.
Active identity
•
An active identity that is not the current outgoing identity is indicated by a green
circle.
•
It can be called.
•
It can be selected as the outgoing identity for making calls by pressing
the navigation key.
A blue circle with a revolving white ring indicates that the identity is trying to register.
A gray circle with a white "x" indicates that the identity is not properly registered.
Check your connections and whether the server is down.
Note: Identities can be deactivated without removing the registration settings by changing their
status to "inactive" on the phone's web interface. Inactive identities are not displayed on the
idle screen. They cannot be called or selected as the outgoing identity. To deactivate the identity,
open the phone's web interface > Identity (1-12).
1. Change the "Identity active" setting to off.
2. Click Re-Register.
3. Click Save.
For information about configuring new identities or modifying existing ones, see "Identities/accounts" on page
89.
Function key line
The symbols on the buttons in this line depict the functions that can be activated by pressing the function key
underneath the respective symbol. See "Appendix 1 - Display Symbols and Icons" on page 105 for a complete
list. The factory defaults are:
Directory. See "Directory" on page 45.
Call lists. See "Call lists" on page 69.
Forwarding all calls (on/off). See "Call forwarding" on page 72 and 96.
29
Getting to Know Your Phone
/
on
Advertisement
Table of Contents
