Atm Pvc - Sagem SAGEMFAST 1500WG Reference Manual

4.4.1

ATM PVC

Enter ATM (Asynchronous Transfer Mode) function parameters here.
Parameter
Protocol
VPI / VCI
Encapsulation
Reproduction and communication prohibited without the written permission of E
4 - Configuring the SAGEM F@st™ 1500 ADSL router
• Disable
Disables the ATM mode.
• 1483 Bridging Bridging: Bridging is a standardized layer 2 technology. It is typically
used in corporate networks to extend the physical reach of a single
LAN segment and increase the number of stations on a LAN without
compromising performance. Bridged data is encapsulated using the
RFC1483 protocol to enable data transport.
• PPPoA: Point-to-Point over ATM
• 1483 Routing
Use 1483 Routing protocol.
• PPPoE Point-to-Point over Ethernet.
• MAC Encapsulated MAC Encapsulated Routing
Routing
Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI).
Each connection must have a unique pair of VPI/VCI settings.
Specifies how to handle multiple protocols at the ATM transport layer.
• VC-MUX
Point-to-Point Protocol over ATM Virtual Circuit Multiplexer (null encapsulation)
allows only one protocol running per virtual circuit with less overhead.
• LLC Point-to-Point Protocol over ATM Logical Link Control (LLC) allows multiple
protocols running over one virtual circuit (using slightly more overhead).
Description
SAGEM F@st™ 1500 Reference Manual - 288053220-04
E
E E
Page 4-17