Atm Pvc - Sagem F@ST 1500 Reference Manual

4.4.1

ATM PVC

Enter ATM (Asynchronous Transfer Mode) function parameters here.
Parameter
Protocol
VPI/VCI
Encapsulation
QoS
PCR/SCR/MBS
Reproduction and communication prohibited without the written permission of E
4 - Configuring the SAGEM F@st™ 1500 ADSL router
• Disable
• 1483 Bridging
• PPPoA:
• 1483 Routing
• PPPoE
• MAC Encapsulated
Routing
Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI).Each connection must have a
unique pair of VPI/VCI settings.
Specifies how to handle multiple protocols at the ATM transport layer.
• VC-MUX Point-to-Point Protocol over ATM Virtual Circuit Multiplexer (null encapsulation)
allows only one protocol running per virtual circuit with less overhead.
• LLC Point-to-Point Protocol over ATM Logical Link Control (LLC) allows multiple protocols
running over one virtual circuit (using slightly more overhead).
• CBR Constant Bit Rate. It is used for voice application.
• VBR Variable Bit Rate. It is used for video application.
• UBR Unspecified Bit Rate. It is used in Best Effort for IP and Ethernet (for Data
Application)
• PCR Peak Cell Rate.
• SCR Sustainable Cell Rate.
• MBS Maximum Burst Size.
Description
Disables the ATM mode.
Bridging: Bridging is a standardized layer 2 technology. It is
typically used in corporate networks to extend the physical reach of
a single LAN segment and increase the number of stations on a
LAN without compromising performance. Bridged data is
encapsulated using the RFC1483 protocol to enable data
transport.
Point-to-Point over ATM
Use 1483 Routing protocol.
Point-to-Point over Ethernet.
MAC Encapsulated Routing
SAGEM F@st™ 1500 Reference Manual - 288053220-03
E
E E
Page 4-15