Table of Contents
Advertisement
4 - Configuring the SAGEM F@st™ 1500 ADSL router
4.9
Route
These pages define routing related parameters, including static routes and RIP (Routing
Information Protocol) parameters.
In this menu is included the following sub-menus:
Static Route (see section 4.9.1),
RIP (see section 4.9.2),
Routing Table (see section 4.9.3).
4.9.1
Static Route
Click "Add" to add a new static route to the list, or check the box of an already entered route
and click "Modify". Clicking "Delete" will remove an entry from the list.
Parameter
Index
Network Address
Subnet Mask
Gateway
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of E
Page 4-48
Description
Check the box of the route you wish to delete or modify.
Enter the IP address of the remote computer for which to set a static route.
Enter the subnet mask of the remote network for which to set a static route.
Enter the WAN IP address of the gateway to the remote network.
E
E
E
Advertisement
Table of Contents
