Sagem SAGEMFAST 1500WG Reference Manual page 35

1) On the Windows desktop, click Start/Programs/ Command Prompt.
2) In the Command Prompt window, type "IPCONFIG /RELEASE" and press the ENTER key.
3) Type "IPCONFIG /RENEW" and press the ENTER key. Verify that your IP Address is now
192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is
192.168.2.1. These values confirm that your SAGEM F@st
functioning.
4) Type "EXIT" and press the ENTER key to close the Command Prompt window.
Your computer is now configured to connect to the SAGEM F@st
Router.
Reproduction and communication prohibited without the written permission of E
3 - Configuring Client Computer
SAGEM F@st™ 1500 Reference Manual - 288053220-04
TM
1500 ADSL Router is
TM
1500 ADSL
E
E E
Page 3-11