Table of Contents
Advertisement
3 - Configuring Client Computer
After completing hardware setup by connecting all your network devices, you need to configure
your computer to connect to the SAGEM F@st
See:
PC
Windows 98/Me
Windows NT 4.0
Windows 2000
Windows XP
Mac
Mac OS 10.2
Configuring Your Macintosh Computer" depending on your operating system.
3.1
TCP/IP Configuration
To access the Internet through the SAGEM F@st
network settings of the computers on your LAN to use the same IP subnet as the
TM
SAGEM F@st
Router are:
IP Address
Subnet Mask
These settings can be changed to fit your network requirements, but you must first
configure at least one computer to access the SAGEM F@st
Router's web configuration interface in order to make the required changes. (See
"Configuring the SAGEM F@st
on configuring the SAGEM F@st
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of E
Page 3-2
on sub-section 3.2.1
on sub-section 3.2.2
on sub-section 3.2.3
sub-section 3.2.4
on sub-section 3.3
1500 ADSL Router. The default IP settings for the SAGEM F@st
:
192.168.2.1
:
255.255.255.0
TM
1500 ADSL Router.
TM
1500 ADSL Router, you must configure the
TM
1500 ADSL Router" on chapter 4 for instruction
TM
1500 ADSL Router).
TM
1500 ADSL
TM
1500 ADSL
E
E
E
Advertisement
Table of Contents
