Transmit Tone Level; Ptt Id Sidetone - Kenwood NX-P500 User Manual

TRANSMIT TONE LEVEL

Adjust the volume on the sender's side if the volume of the alert tone etc. he hears
is too loud.
1
Enter the Setting mode {p.37}.
2
Press the
3
Press the Menu button then press the
value.
-20 dB(Low
0 dB(Normal)
4
Press the Menu button to confirm the selection, then press the PTT switch or
the Side button to return to the operation mode.

PTT ID SIDETONE

When press the PTT switch to send it, it is a function to notify you that it is ready
to talk. It is used to prevent the head of a call from being cut off.
This function is activate when Channel type is Analog.
To turn the PTT ID Sidetone on or off:
1
Enter the Setting mode {p.37}.
2
Press the
3
Press the Menu button then press the
value.
4
Press the Menu button to confirm the selection, then press the PTT switch or
the Side button to return to the operation mode.
or button to select "
Adjust in 2 dB steps.
level)~
It attenuates the volume by the numerical value.
or button to select "
PTT ID Sidetone
OFF The
PTT ID Sidetone
ON The
".
or button to select your desired
".
or button to select your desired
function is deactivate.
function is activate.
49