Installer Manual Fleck 5800 - SXT - Programming
6.7.5. Volume since last regeneration (VU)
Note
Shows the volume used since the last regeneration (L).
D
Volume since last regeneration display (L or Gal depending on display
format programmed).
6.7.6. Reserve capacity (RC)
Note
Shows the remaining reserve volume until next regeneration (L).
E
Volume until next regeneration display (L or Gal depending on display
format programmed).
6.7.7. Totalizer (TV)
Note
Shows the total volume used (L).
F
Totalizer display (L or Gal depending on display format programmed).
6.7.8. Software version (SV)
Note
Shows the version of the software used by the controller.
G
Software version display:
62 / 92
Ref. MKT-IM-004 / A - 18.04.2017