Load Settings; Reset Settings; Reset Passwords - Brady BradyPrinter i5100 Setting Configurations And Connectivity Manual

9 Extras
9.4

Load Settings

A printer configuration previously saved to a storage device can be loaded with the Load settings function.
 Start menu.
 Select Extras.
If the menu is protected via a PIN a prompt appears in the display. Enter the code number and confirm it.
 Select Load settings.
 Select the desired file.
 Confirm the selection with
loading procedure is complete. The printer returns to the Extras menu.
If an error occurs during the loading procedure, an error message appears in the display. Restart the loading procedure in
this case. If an error occurs again, the configuration parameters must be entered via the control panel.
9.5

Reset Settings

With the Default settings function all setup parameters excepting the passwords  page 16 can be reset to the default
values.
 Start menu.
 Select Extras.
If the menu is protected via a PIN a prompt appears in the display. Enter the code number and confirm it.
 Select Reset settings.
The display shows "Reset settings".
 Select Continue. The setup parameters will be reset and printer returns to the Extras menu.
9.6 Reset Passwords
The function Reset passwords allows to reset all passwords for the network services to the default values.
 Start menu.
 Select Extras.
If the menu is protected via a PIN a prompt appears in the display. Enter the code number and confirm it.
 Select Reset passwords.
The display shows "Reset passwords".
 Select Continue. The passwords will be reset and printer returns to the Extras menu.
Function
Web interface access
FTP printing
FTP access to storage devices
FTP firmware update
Web service
Table 26 Default passwords
i5100 Configuration Manual
. Loading of the configuration data starts. Do not remove the USB flash drive until the
User name
admin
ftpprint
ftpcard
ftpadmin
soap
Password
admin
print
card
admin
soap
47