8
Diagnostic Functions
8.4
Event Log
The label printer saves the following events in the Event log:
•
Hardware fault
•
Printhead replacement
•
Firmware updates
•
Changing the OEM name
•
Resetting of the service counters
The printout occurs using the heat level and print speed specified in the Setup > Printing menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Start menu.
Select Diagnostics > Event log.
Event log
Tue Feb 13 14:15:58 2018
Brady i5100-300
Firmware V5.14 (Feb 09, 2018) - #164162032326
Date
Description
19.10.17 07:45
New printhead, 300 dpi Ser. #72-01093
17.11.17 07:46
Firmware update -> V5.12 (0000)
30.11.17 13:38
Process 'printengine' terminated, Restart required
30.11.17 13:42
Process 'bdc' terminated, Restart required
08.12.17 14:01
Firmware update -> V5.13 (0000)
05.01.18 11:38
Cleaning interval -> 41242 + 1000000
13.02.18 10:25
Firmware update -> V5.14 (0000)
Figure 21
Event log
42
i5100 Configuration Manual