Command Line Rules - Motorola MVME5500 Installation And Use Manual

MOTLoad Firmware
3

Command Line Rules

3-6
Example
MVME5500>help testRam
Usage: testRam [-aPh] [-bPh] [-iPd] [-nPh] [-tPd] [-v]
Description: RAM Test [Directory]
Argument/Option Description
-a Ph: Address to Start (Default = Dynamic Allocation)
-b Ph: Block Size (Default = 16KB)
-i Pd: Iterations (Default = 1)
-n Ph: Number of Bytes (Default = 1MB)
-t Ph: Time Delay Between Blocks in OS Ticks (Default = 1)
-v O : Verbose Output
MVME5500>
There are a few things to remember when entering a MOTLoad command:
Multiple commands are permitted on a single command line,
provided they are separated by a single semicolon(";").
Spaces separate the various fields on the command line
(command/arguments/options).
The argument/option identifier character is always preceded by a
hyphen ("-") character
Options are identified by a single character
Option arguments immediately follow (no spaces) the option
All commands, command options, device tree strings, etc., are
case sensitive
Example:
MVME5500> flashProgram -d/dev/flash0 -n00100000
For more information on MOTLoad operation and function, refer to the
MOTLoad Firmware Package User's Manual.
Literature Center Web Site