Summary Of Changes - Motorola MVME5500 Installation And Use Manual

About This Manual
The MVME5500 Single-Board Computer Installation and Use manual
provides the information you will need to install and configure your
MVME5500 single-board computer. It provides specific preparation and
installation information, and data applicable to the board.
As of the printing date of this manual, the MVME5500 supports the
models listed below.
Model Number
MVME5500-0161
MVME5500-0163

Summary of Changes

This is the third edition of the Installation and Use manual. It supersedes
the October 2003 edition and incorporates the following changes.
July 2005
October
2003
Date
Updated the description of the J17 header to indicate the
factory default has the SROM initialization disabled with a
jumper across pins 2-3.
Added diagrams to
Selection Headers (J6, J7, J28, J32, J34, J97 – J110) on page
5-33 to better explain the PMC, SBC/IPMC761, and
SBC/IPMC712 modes in conjunction with the P2 adapter and
MVME761/712 transition modules. Added
RAM5500 Memory Expansion
configuration of the
Flash device 0. Added LFM specification to
A-2. Added more details to
changes were made to correct typographical errors.
Description
1 GHz MPC7455 processor, 512MB SDRAM,
Scanbe handles
1 GHz MPC7455 processor, 512MB SDRAM,
IEEE handles
Changes
Ethernet 2, PMC/SBC Mode, and P2 I/O
Module. Changed the default
Flash Boot Bank Select Header (J8)
VME Settings on page
Appendix B,
to
Table A-2 on page
3-12. Other
xvii