Eeprom Write Protect Header (J30); Table 5-34. Eeprom Write Protect Header (J30) Pin Assignments - Motorola MVME5500 Installation And Use Manual

EEPROM Write Protect Header (J30)

A 2-pin 2 mm planar header enables/disables programming of the on-
board EEPROMs as a means of protecting the contents from being
corrupted. No jumper installed disables EEPROM programming by
driving the WP pin to a logic high. The jumper must be installed in order
to program any of the EEPROMs at addresses A0, A6, A8, and/or AA. The
pin assignments for this header are as follows:
Table 5-34. EEPROM Write Protect Header (J30) Pin
http://www.motorola.com/computer/literature
EEPROM Write Protect Header (J30)
Assignments
Pin Signal
1 I2CWP
2 GND
5
5-45