Specifications; Unpacking; Applications - Ryobi SA120 Operator's Manual

DRILL-DRIVER
Chuck
Motor
Switch
No Load Speed
Clutch
Charger Input
Charge Rate
Torque
INSTRUCTIONS
When unpacking the tool:
Carefully remove the tool and accessories from the box.
Make sure that all items listed in the packing list are in-
cluded.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Cordless Drill
Charger
Battery Pack
28 Piece Bit Kit
Operator's Manual
Case
You may use the two speed drill for the purposes listed below:
Drilling in wood
Drilling in ceramics, plastics, fiberglass, and laminates
Drilling in both hard and soft metals
Using driving accessories, such as driving screws with screwdriver bits
Mixing paints

SPECIFICATIONS

SA960
3/8 in. (10 mm) Keyless
DC Motor 9.6 Volt
Variable Speed
0 - 550 RPM
24 Positions
120 V, 60 Hz, AC only
3-6 Hours
Maximum 90 in.lb.

UNPACKING

If any parts are missing do not operate the tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.

APPLICATIONS

Page 7
SA120
3/8 in. (10 mm) Keyless
DC Motor 12 Volt
Variable Speed
0 - 550 RPM
24 Positions
120 V, 60 Hz, AC only
3-6 Hours
Maximum 95 in.lb.
WARNING: