Product Specifications; Vibration Level - Ryobi RPD800 Instructions Manual

PRODUCT SPECIFICATIONS

Hammer drill
Model
Voltage
Input
No-load speed
Blows per minute (Impact rate)
Chuck capacity
Drilling capacity
in wood
in metal
in masonry
Weight
(According to EPTA procedure 01/2014)
Measured sound values determined according to EN 62841:
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Impact drilling into concrete
Uncertainty K
Drilling into metal
Uncertainty K
Screwdriving without impact
Uncertainty K

VIBRATION LEVEL

WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of work patterns.
RPD800
220 - 240 V 50 Hz
800 W
0 - 3,000 min
-1
0 - 51,000 min
-1
13 mm
34 mm
13 mm
16 mm
1.8 kg
L = 95.0 dB
pA
5.0 dB (A)
L = 106.0 dB
WA
5.0 dB (A)
a = 16.2 m/s
2
h,ID
1.5 m/s
2
a = 5.2 m/s
2
h,D
1.5 m/s
2
≤ 2.5 m/s
a
2
h
1.5 m/s
2