Product Specifications; Battery And Charger; Vibration Level - Ryobi RCD1201 Original Instructions Manual

PRODUCT SPECIFICATIONS

Drill driver
Model
Voltage
Chuck
Switch
No-load speed (drill mode)
Clutch
Maximum torque
Maximum spade bit
Weight - excluding battery pack
Measured sound values determined
according to EN 60745:
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors
Weighted root mean
The vibration total values(triax vector sum) determined according
to EN60745:
Drilling into metal, vibration emission
value
Uncertainty K
Screw driving without impact,
vibration emission value
Uncertainty K

VIBRATION LEVEL

WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of work patterns.

BATTERY AND CHARGER

RCD1201
12 V
0.8 - 10 mm
Variable speed
715 min- 1
22 positions
25 Nm
25 mm
0.89 kg
65.5 dB(A)
3 dB
76.5 dB(A)
3 dB
a , D = 1.2 m/s 2
h
1.5 m/s 2
a = 0.4 m/s 2
h
1.5 m/s 2
Compatible battery
Model
pack (not included)
RCD1201 BSPL1213
Compatible charger
(not included)
BCL12L1H