Ethernet Sub-Menu - HP A6616 Installation Manual

The system displays:
=========================<Enter Serial SubMenu>=======================
|Note:the operating device is cfa0
| <1> Download Application Program To SDRAM And Run
| <2> Update Main Application File
| <3> Update Backup Application File
| <4> Update Secure Application File
| <5> Modify Serial Interface Parameter
| <0> Exit To Main Menu
======================================================================
Enter your choice(0-5):
Items on this sub-menu are described in the following table.
Table 6-2 BootWare serial sub-menu
<1> Download Application Program To SDRAM And
Run
<2> Update Main Application File
<3> Update Backup Application File
<4> Update Secure Application File
<5> Modify Serial Interface Parameter
<0> Exit To Main Menu

Ethernet Sub-menu

Select 3 on the main menu to enter the Ethernet sub-menu, where you can update application
files the BootWare using FTP/TFTP.
The system displays:
=========================<Enter Ethernet SubMenu>=====================
|Note:the operating device is cfa0
| <1> Download Application Program To SDRAM And Run
| <2> Update Main Application File
| <3> Update Backup Application File
| <4> Update Secure Application File
| <5> Modify Ethernet Parameter
| <0> Exit To Main Menu
| <Ensure The Parameter Be Modified Before Downloading! >
======================================================================
Enter your choice(0-5):
Items on the Ethernet sub-menu are described in the following table:
Table 6-3 Ethernet sub-menu
<1> Download Application Program To SDRAM And
Run
<2> Update Main Application File
<3> Update Backup Application File
Menu item
Menu item
|
|
|
|
|
|
|
Description
Download an application to SDRAM through the
serial interface and run the program.
Update the main application file.
Update the back up application file.
Update the secure application file.
Modify serial interface parameters.
Return to the main menu.
|
|
|
|
|
|
|
|
Description
Download an application to SDRAM and run the
program.
Update the main application file.
Update the backup application file.