Features; Product Specifications; Know Your Drill; Variable Speed - Ryobi D41 Operator's Manual

PRODUCT SPECIFICATIONS

Chuck Capacity.......................................1/16 in. to 3/8 in.
Switch............................. VSR
KEYLESS
CHUCK

KNOW YOUR DRILL

See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/center
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the switch trigger in the
OFF (center lock) position helps reduce the possibility of
accidental starting when not in use.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.

FEATURES

(Variable Speed Reversible)
LEVEL
SWITCH
TRIGGER
No Load Speed ..............................................0-1,600/min.
Input ............................... 120 V, 60 Hz, AC only, 4.5 Amps
Net Weight.............................................................. 3.8 lbs.
ROTATION SELECTOR
(FORWARD/REVERSE/
LEVELS
Levels are located on the top and end of the motor
housing to help keep the drill bit level during use.
LOCK-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.

VARIABLE SPEED

The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
8
LEVEL
DIRECTION OF
CENTER LOCK)
LOCK-ON
BUTTON
CORD
Fig. 1