Download
Share
Print this page
Ryobi D45C Operator's Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Drill
  5. D45C
  6. Operator's manual
Ryobi D45C Operator's Manual

Ryobi D45C Operator's Manual

3/8 in. (10 mm) drill-driver double insulated
Hide thumbs

Advertisement

Quick Links

THANK YOU FOR BUYING A RYOBI DRILL-DRIVER
Your new drill-driver has been engineered and manufactured to Ryobi's high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new drill-driver.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your drill-driver properly and
only for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
3/8 in. (10 mm) Drill-Driver
Model No. D45C
DOUBLE INSULATED

Advertisement

loading

Related Manuals for Ryobi D45C

Summary of Contents for Ryobi D45C

  • Page 1 THANK YOU FOR BUYING A RYOBI DRILL-DRIVER Your new drill-driver has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. CAUTION: Carefully read through this entire operator's manual before using your new drill-driver.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Table of Contents ... 2 General Safety Rules ...2-3 Specific Safety Rules and/or Symbols ...4-5 Features ...5-7 Operation ... 7-11 Maintenance ... 12 Exploded View and Repair Parts List ... 13 Parts Ordering / Service ... 14 GENERAL SAFETY RULES WARNING: Read and understand all instructions.

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES Tool Use and Care Use clamps or other practical way to secure and support the workpiece to a stable platform. Hold- ing the work by hand or against your body is un- stable and may lead to loss of control. Do not force tool.

  • Page 4: Specific Safety Rules And/Or Symbols

    SPECIFIC SAFETY RULES AND/OR SYMBOLS Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

  • Page 5: Features

    D) NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment. WARNING: The operation of any drill-driver can result in foreign objects being thrown into your eyes, WEAR YOUR which can result in severe eye damage. Before beginning power tool operation, always wear...
  • Page 6 Carefully read through this entire operator's manual before using your new drill-driver. Pay close attention to the Safety Rules, Warnings and Cautions. If you use your drill-driver properly and only for what it is intended, you will enjoy years of safe, reliable service. ELECTRICAL CONNECTION Your drill-driver has a precision built electric motor.

  • Page 7: Operation

    Switch No Load Speed Clutch WARNING: If any parts are missing, do not operate your drill-driver until the missing parts are replaced. Failure to do so could result in possible serious personal injury. SWITCH See Figure 2. To turn your drill ON, depress the switch trigger. Release switch trigger to turn your drill OFF.
  • Page 8 WARNING: Do not hold chuck body with one hand and use power of the drill to tighten chuck jaws on drill bit. Chuck body could slip in your hand or your hand could slip and come in contact with rotating drill bit. This could cause an accident resulting in serious personal injury.
  • Page 9 WARNING: Make sure to insert drill bit straight into chuck jaws. Do not insert drill bit into chuck jaws at an angle and then tighten, as shown in Figure 5. This could cause drill bit to be thrown from drill, resulting in possible serious personal injury or damage to the chuck.
  • Page 10 If not prepared, this loss of control can result in possible serious injury. When drilling metals, use a light oil on the drill bit to keep it from overheating. The oil will prolong the life of the bit and increase the drilling action.
  • Page 11 Whenever necessary to remove the chuck for replacement, etc. use the following procedure: Unplug your drill. WARNING: Failure to unplug your drill could result in accidental starting causing serious injury. Rotate torque adjusting ring to the maximum torque setting. Insert a 8 mm (5/16 in.) or larger hex key into the chuck of your drill and tighten chuck jaws securely.

  • Page 12: Maintenance

    WARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL All parts represent an important part of the double insulation system and should be serviced only at an authorized service center.

  • Page 13: Exploded View And Repair Parts List

    RYOBI 3/8 in. DRILL-DRIVER – MODEL NO. D45C The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your RYOBI 3/8 in. DRILL-DRIVER or when order- ing parts.

  • Page 14: Parts Ordering / Service

    Please refer to the insert or call 1-800- 525-2579 in the United States or 1-800-265-6778 in Canada for your nearest Ryobi Authorized Service Center. You can also check our website at www.ryobitools.com for a complete list of Authorized Service Centers.