Primary Panel Replacement And System Wide Restore; Replace A V6.0 Secondary Panel (Web Mode); Overview; Secondary Panel Replacement And Synchronization - Honeywell NetAXS-123 User Manual

96 |
NetAXS-123 Access Control Unit User's Guide

Primary Panel Replacement and System Wide Restore

IMPORTANT: Ensure a "System Wide Backup" is performed prior to replacing the Primary
Panel.
Step # 1. Power up the "New" Primary panel and log into the Web Interface.
Step # 2. Hard Default the "Secondary" panels as they are bound to the original Gateway
Step # 3. Navigate to the "Advanced" Tab of the primary panel:
IMPORTANT: In order to proceed to Step #4 please wait for all panels to be synchronized.
Step # 4. Select the "Restore Entire Loop" option from the "System Wide Backup" once all

Replace a v6.0 Secondary Panel (Web Mode)

Overview

Details the steps to replace a NetAXS-123 v6.0 "Secondary" panel in an existing loop of
either a wired via RS-485 or Ethernet Virtual Loop (EVL) in Web Mode.

Secondary Panel Replacement and Synchronization

Step # 1. Un-register the original Secondary panel in the Primary panel. Navigate to:
Step # 2. Install the replacement Secondary panel in the loop.
www.honeywell.com/security
panel.
• RS-485 Installations: Secondary panels will automatically register with the
Gateway.
• Confirm the secondary panels are registered.
• EVL Installations: Requires Manual Registration of the Secondary Panels.
• Navigate to the EVL Discovery and "Register" the Secondary Panels.
Refer to the "Synchronization Detail Chart"
Note The RS-485 Secondary panels will automatically register with the primary
panel and for Ethernet Virtual Loop (EVL) a manual registration is required.
of the Secondary panels are registered with the Primary.
• Refer to the "Restore Entire Loop Detail Chart"
• RS-485 Unregister Tab: Panel Configuration > Advanced > RS-485 Unregister.
• EVL Tab: Menu > Panel Configuration > Advanced > EVL Discovery.