Configuring The Network Settings; Configuring Time Management - Honeywell NetAXS-123 User Manual

30 |
NetAXS-123 Access Control Unit User's Guide
2.
3.

Configuring the Network Settings

In the Panel Configuration page, you can configure the following network-related settings:
•
•
•
•
•
Scroll down to the Network section.
The General section allows the user to:
Other fields in the Panel Configuration > Settings > General section are Firmware Version,
Reset, Panel Type, and Boot Time.

Configuring Time Management

In the Panel Configuration page, you can configure the following time-related settings:
•
Scroll down to the Time Management section.
www.honeywell.com/security
Click the Panel Name field, and then enter a panel name.
Click Save.
View the panels MAC Address
Set network settings to Static or DHCP
Configure the IP address of the panel
Configure the Subnet Mask
Configure the Default Gateway
Note Note: Only the primary panel will display network information.
• Configure the panel's name
• View the active and inactive firmware version
• Toggle the firmware version set
• Reset the panel
• View the panel type
• View the last boot time of the panel
Set the current time.