Honeywell NetAXS-123 User Manual page 79

Table 3-1
Field
Device Name
Space
Severity
Type
LN (Logical Device
Number)
PN (Physical Device
Number)
Alarms & Events Fields
Description
Displays the name of the device that generated the alarm.
Displays the name of the space where the alarm occurred.
Filter by Space: You can filter alarms and events by the
space by clicking the filter icon
header.
Indicates the importance of the event: Normal, Major, or
Critical.
Normal: Indicates that the panel or device is back online,
valid card transactions, the input is back to the normal
state, or an output has been used.
Major: Indicates an invalid card transaction, such as card
not found, invalid format, anti-passback violation, site
code violation, time-zone violation.
Critical: Indicates that the panel or a device is offline, or
that an input is in an alarm state.
Filter by Severity: You can filter alarms and events by the
severity by clicking the filter icon
header.
Indicates the type of alarm/event, such as:
• Normal State
• Alarm State
• Ajar State
• Card Found
• Card Not Found
• Input Alarm
• Panel Offline
Filter by Type: You can filter alarms and events by the type
by clicking the filter icon
There are 61 event types from which to choose.
A unique number starting at 1 that is assigned to an alarm
generating point. This number is never duplicated either
on a Controller nor its attached 1- or 2-door I/O board.
There is one exception to this: Door Readers. For a list of
common values, see Table 3-2
A number at the board level that is assigned to a specific
alarm generating point. NetAXS-123 Controller starts at 1
and goes to 8, 1-Door I/O board as a new board goes from
1 to 4, and 2-door I/O board goes from 1 to 8. System
alarms, such as a reset, which are not board-specific, will
report a value of 0.
There is one exception to this: Door Readers. For a list of
common values, see Table 3-2
next to Space in the
next to Severity in the
next to Type in the header.
on page 78.
on page 78.
800-05168V5 - A - 02/2018
| 77