Honeywell NetAXS-123 User Manual page 59

Table 2-9 Card Format Settings
Settings Description
Available Formats Lists all the formats in the panel. All formats, new ones as well as
the eight default formats, are listed under Available Formats. This
information allows all readers by default to use all formats to try
and decipher card reads. The reader will then use every Available
Format(s) to decipher incoming card reads. Any cards swiped with
formats that do not match the Available Format(s) are then
reported as an Invalid Format event.
Selected Formats Lists specific formats selected by the user from the Available
Formats list that the reader should use to decipher card reads. As
soon as a single format is placed in the Selected Formats column,
the reader begins to use only the selected format, ignoring any
unselected formats in the Available Formats list.
Cards swiped with formats that do not match the Selected
Format(s) are then reported as an Invalid Format event, even if the
format is in the Available list. This selection is on a per reader
basis--that is, each reader can have its own selected formats.
Selections at one reader do not affect another reader.
Note The user should never add in more than one format using the same total
number of bits. If you need more information, please contact Technical
Support.
(+)
Click the Add icon of each desired card format under the Available Formats list, and to
move the format(s) into the Selected Formats list.
Note If you select no formats, the reader will use all available formats (up to 128
per pane) as described for the Available Formats setting in
select a subset of formats for a given reader, the reader will interpret only
those formats and ignore formats that are not selected, as described for the
Selected Formats setting in
Click Save.
If you want to create a new card format, click Circled Add icon
Table 2-9.
| 57
Table 2-9 If you
to display an empty
800-05168V5 - A - 02/2018