Using A Different Telephone In The Same Way As Your Own - Siemens HiPath 4000 Operating Manual

Step by step
> <
BASIC SERVICE
> <
PIN / COS?
> <
PIN 1?
Using a different telephone in the same
way as your own
You can log on to another telephone belonging to the
HiPath 4000 system via a personal identification
number or PIN (this includes telephones of networked
HiPath 4000 systems, for example, at other branches of
your company). At the other telephone you can then:
• make calls and assign the charges to cost centres,
• make calls and assign the charges to specific
projects,
• check your mailbox,
• set appointments.
Using an internal PIN, you can have your calls diverted
to a telephone in the office or department where you
will be for a temporary period (call forwarding - "follow
me").
Prerequisite: You have been assigned a PIN by System
Support. You require an internal PIN for calls within your
own HiPath 4000 system, while for calls involving other
HiPath 4000 systems in the integrated network you re-
quire a network-wide PIN.
u Call the system menu.
[
Select and confirm the basic service.
either:
6 1 Enter the service code
(61 for PIN 1, 62 for PIN 2 etc.).
or:
[
Select the menu item and confirm.
[
Select the menu item and confirm.
If you have several PINs and wish to use another one,
select the other PIN.
then:
You are prompted to enter the PIN by the message "En-
ter station no." or "Enter ID" on the display.
The following applies within the actual HiPath
4000-system:
o
Enter the internal PIN.
Conducting calls – enhanced functions
55